GLASS OPENING ENTRANCE

XF1 XF3 XF8
XF1

 

XF3

 

XF8
rout design exterior face only

GLASS OPENING - XF1 & XF3
Solid construction (solicore) incorporating beaded glass opening, factory silicon glazed with clear glass and frost Etchlite glass. Door faces duracote primed tempered hardboard.


GLASS OPENING - XF8
Solid construction featuring attractive rout design external face.


STOCK SIZES:
1980 x 760/810/860 x 40mm

 

 

Unglazed door available in 1980 x 760/810 x 40.
Glazing options available clear and etchlite.

 

Blockboard solid
Solicore
Overhead

SOLID CORE ENTRANCE
BLOCKBOARD

Laminated timber core, plywood door faces (incorporating phenolic glue line).

STOCK SIZES:
2400 x 1200 x 35mm
2100 x 900 x 35mm
Door can be trimmed or cut down to any size including cut outs for air grills, glass openings, etc.

 

 

SOLICORE ENTRANCE
DURACOTE

Available with primed tempered hardboard water resistant door faces. Unclashed.

STOCK SIZES:
1980 x 710/760/810/860/910/960 x 40mm
3 hinges recommended for all solid doors.

NOTE: All entrance doors must be fully sealed/painted including top and bottom rails with enamel paints prior to weather exposure. A minimum 2 coats of sealer/undercoat followed by top coats. Light refl ective colours recommended.

OVERHEAD ENTRANCE PROTECTION

With New Zealand’s climate extremes exterior/entrance doors will weather differently and timber doors are more susceptible to the elements than steel or aluminium.Depending on your location and aspect the required overhead protection will vary. The chart below will assist in determining the size of overhead protection which will vary depending on home design and adjacent walls.

OVERHEAD PROTECTION CHART

Sheltered area A = ½ B
Exposed area A = B

Dimension ‘C’ – subject to adjacent walls – minimum width same width as entry frameNote: colour choice for your exterior door will also affect weathering. Dark colours absorb heat, accelerating door deterioration, warping and bowing.